Tree removal can be extremely dangerous and also life-threatening. It is never recommended to eliminate a tree all on your own unless this can be a small one that you are confident you can handle safely. Otherwise, tree removal should be left in the hands of professionally-trained and equipped tree service contractors. In case you have a tree on your property that is fairly small, but should be removed, you can possible do-it-yourself with the proper tools, knowledge, and planning.Tree Removal PreparationProper preparation for small tree removal involves gathering all of your needed supplies, and, a comprehensive inspection of the tree. Look to see if the tree leans a proven way or another, and plan an escape route in case it generally does not fall the way you expect it to fall. Also, examine whether or not there are any obstacles in any direction of the tree, including vehicles, structures, and other trees. For anyone who is sure there's enough safe clearance for the tree to fall, then you can certainly move on to gathering your equipment and tools. This includes:Safety Gear (Utility gloves, goggles, hard hat, steel toe boots, etc.)ChainsawAx or HacksawLadderRopeWedgesFirst Aid KitTO ELIMINATE a TreeOnce you have all your equipment and supplies, you can get started removing the tree. First, use your ax to knock on the bark several times, and in several different places, to learn how solid or hollow the tree is. Finding a less dense area to cut will undoubtedly be easier. Next, plan which side of the tree you intend to make your cut. Turn to see where the tree naturally leans; it is best to cut a tree in the direction where it really wants to naturally fall. Be sure the area where in fact the tree drops is level therefore the tree will not roll or bounce after it falls.Make a horizontal cut at hip-height, and about 1/3rd in to the tree. Do this on the side of the tree where you want it to fall. If you need the tree to fall to the right, you must make you cut on a single side so that it falls inward, towards the cut. The tree will fall perpendicular to your horizontal cut. Your next cut should develop a wedge in to the tree. So make the second cut at an angle from the initial cut. It should look like a lemon wedge.Your third cut is called a back cut, and is ought to be made on the opposite side of your wedge cut. This cut can make the tree fall over privately of your wedge cut. Make it about 1.5 inches above the wedge cut, and as thick as possible. You may also use a wedge to avoid the tree from settling onto the chainsaw. Add  https://surreytreesurgeons.uk/best-tree-removal-surrey/  until the tree begins to fall. Then run! But do not turn your back on the tree since it falls.